Sharp JX-8200 Service Manual page 7

SHARP SERVICE MANUAL JX8200SM [1] FEATURES & [2] SYSTEM CONFIGURATIONS
1) PS2 board (Option) (JX-80PS)
PostScript level 2 compatible interpreter software expanding option
board. The parts are common with the flash memory board stated
below. The above software is written into the flash memory board.
80mm × 60mm
Board size:
8MBytes (1 × 16MBit, 4 pcs.)
Memory capacity:
Access speed: 100ns (LH28F016SUT-10)
2) LocalTalk/RS232C interface board (Option) (JX-80AP)
This board allows LocalTalk communication (in AppleTalk protocol).
125mm × 125mm
Board size:
3) Expansion DRAM module (SIMM)
72pin SIMM modules can be added.
72pin SIMM (First page mode type)
70ns or less
Only the same capacity modules can be attached to the slots.
Therefore, the following two combinations are allowed:
16MB × 1, 16MB × 2
Note: Some of the ED0 type cannot be used.
C. Font
PCL5EC (45 outline fonts)
1 True Type fonts
44 Micro Type fonts
1 bitmap font
PS2 (35 outline fonts)
35 Type 1 fonts
D. Option
Option
(1) Paper feed unit
Model
Name
name
Option paper feed
JX-80SU
unit
Universal cassette
JX-80UC
Option paper feed unit
2 – 3
Paper feed Option paper feed unit
section
Universal paper feed cassette
I/F AppleTalk & RS232C I/F board
Network card
Memory
Flash memory board (8MB)
SIMM memory (4MB)
SIMM memory (8MB)
SIMM memory (16MB)
Content
Additional paper feeder
(excluding cassette)
For copier and 2nd cassette
feeder
Universal cassette