Sharp JX-8200 Service Manual page 143

SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
(2) Paper pick-up unit
1
Remove the paper pick up unit.
Paper pick-up unit
(3) Cassette size sensor PWB
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the back cabinet, and remove the cassette size sensor
PWB.
(4) Paper empty detector
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the paper empty detector.
Cassette size
sensor PWB
Back
cabinet
Paper empty
detector
(5) Paper pick-up roller/Paper pick-up roller clutch
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the paper pick-up solenoid and the paper pick-up roller
clutch.
Note: When assembling, check that the solenoid flapper is properly
connected to the sleeve. Check that the pick-up roller stops at
the normal position.
3
Remove the paper pick-up roller.
12 – 11
Paper pick-up
clutch
Paper pick-up
solenoid
Paper pick-up
roller