Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
(3) Transparent sheet sensor (OHP IN)
1
Remove the operation cabinet. (Refer to the A-4.)
2
Remove the paper transparent sheet sensor. (OHP IN)
(4) Paper pass detector 1 (HF IN)
1
Remove the operation cabinet. (Refer to the A-4.)
2
Remove the paper pass detector 1 (HF IN)
Paper pass detector 1 (HFIN)
Note: When assembling, check that the detector is securely fixed
with the pawl. Check that the actuator moves smoothly and is
reset by the spring.
Transparent sheet
sensor (OHPIN)
12 – 6
(5) Paper empty detector
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the paper empty detector.
Paper empty detector
Note: When assembling, check that the detector is securely fixed
with the pawl. Check that the actuator moves smoothly and is
reset by the spring.
(6) Paper pass detector 2 (PIN)
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the paper pass detector 2. (PIN)
Note: When assembling, check that the detector is securely fixed
with the pawl. Check that the actuator moves smoothly and is
reset by the spring.
Paper pass detector 2 (PIN)
Advertisement
Table of Contents
