SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
2
Remove the separation pawl drive joint.
Separation pawl
drive joint
Separation pawl unit
3
Remove the separation pawl unit.
4
Remove the cabinet of the right cabinet operation section.
(Refer to A-3/4.)
5
Remove the left and the right lower arms of the transfer unit.
(Refer to E-12.)
6
Remove the transfer drum fixing plate. (Refer to the E-2.)
Transfer drum unit
7
Remove the transfer drum unit. (Be careful not to scratch the
transfer drum unit.)
12 – 18
Transfer drum fixing plate