Sharp JX-8200 Service Manual page 22

SHARP SERVICE MANUAL JX8200SM [5] INSTALLATION
5) Check that there is no toner remaining inside. If there is, lightly tap
the cartridge until it falls into the toner box.
6) Remove the toner cartridge by sliding it back and lifting out. Dis-
pose of it according to local regulations.
CAUTION: Do not place toner or the toner cartridge in or near open
flames. The toner may splatter and cause burns. Also,
always keep toner out of reach of children.
(3) Installing the Color Toners (Cyan, Magenta, and
Yellow)
1) Remove the new color toner cartridge from its bag and shake the
toner cartridge, so that the stirrer inside it rattles, vigorously up
and down and left to right eight to ten times.
2) Place the toner cartridge on top of the matching colour toner
compartment of the color developer. Make sure that the teeth
mesh with the grooves of the toner compartment.
CAUTION: If the grooves on the bottom of the toner cartridge do not
fit with those on the top of the toner compartment, the
toner cartridge is not the correct color. Do not force the
toner cartridge onto the toner compartment.
Magenta
Yellow
3) Slide the toner cartridge inside the grooves all the way to the right.
4) Pull out and remove the toner release tape at the bottom of the
toner cartridge to allow the toner to fall into its toner compartment.
5 – 7
Cyan