Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
(5) Front lower cabinet
1
Remove the paper cassette in advance.
2
Remove the transfer unit lower arm R and L, and lift and hold the
transfer unit. Put the transfer unit lower arm R onto the transfer
unit frame (transfer drum bearing section.)
Transfer drum frame
(Transfer drum
bearing section)
Note: When lifting and holding the transfer unit, be careful not to
drop it. If dropped, it is very dangerous. Use enough care.
3
Remove the paper feed unit cover.
Transfer unit
lower arm L
4
Remove the cabinet R.
5
Remove the front lower cabinet with care not to break the pawl.
Transfer unit
lower arm R
Transfer unit
lower arm L
(6) Transport upper cabinet
1
Remove the transport upper cabinet.
12 – 3
Paper feed
unit cover
Front lower cabinet
Transfer upper cabinet
Advertisement
Table of Contents
