Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [10] DIAGNOSTICS
(Items which are set to the default values)
(Toner concentration control level)
ITEM
Yellow toner concentration control level
Magenta toner concentration control level
Cyan toner concentration control level
Black toner concentration control level
(Reference)
The toner concentration means the ratio of toner and developer in the
developing unit.
The toner concentration sensor output display value differs depend-
ing on each developing unit and each machine.
(Print density level)
ITEM
Yellow image print density control level
Magenta image print density control level
Cyan image print density control level
Black image print density control level
The print density level of each color is shown. The density level
differs depending on color.
The greater the display value is, the higher the developing bias volt-
age is; and the smaller the display value is, the lower the developing
bias voltage is.
The greater the developing bias voltage is, the higher the print den-
sity is.
(Time-out time)
ITEM
Time required to shift to the sleep mode [min]
Time required to stop the scanning motor [sec]
After completion of printing or warming up, and after stopping the
main motor before the next print command from the host is received,
if the above set time is past, the printer shifts to the sleep mode and
the scanning motor automatically.
(7) Each color toner supply quantity and each unit
print quantity can be checked. (changed)
Each color toner supply quantity and each unit print quantity can be
set to desired values.
a. Menu display
COUNTER SET XXXX
b. Details
The counter kind can be selected with the v key and the w key. After
selecting the counter kind, press the ENTER (SET) key to display the
counter value. Under this state, press the RESET key to return to the
counter kind selection mode.
With the counter value displayed, the counter value can be changed
with the v key and the w key. Use the MENU key to select the digit
to change.
LEVEL 1
(TONER LEVEL YTON)
TONER LEVEL YTON
TONER LEVEL MTON
TONER LEVEL CTON
TONER LEVEL KTON
LEVEL 1
(ID LEVEL YELLOW)
ID LEVEL YELLOW
ID LEVEL MAGENTA
ID LEVEL CYAN
ID LEVEL BLACK
LEVEL 1
(TIMEOUT SET SLP)
TIMEOUT SET SLP
TIMEOUT SET PLM
10 – 11
DISPLAY
LEVEL 2
LEVEL 3
YTON XXX (Set to 80.)
MTON XXX (Set to 80.)
CTON XXX (Set to 80.)
KTON XXX (Set to 80.)
DISPLAY
LEVEL 2
LEVEL 3
YELLOW XXX (Set to 90.)
XC: (Set to 90.)
MAGENTA XXX (Set to 90.)
XC: (Set to 90.)
CYAN XXX (Set to 90.)
XC: (Set to 90.)
BLACK XXX (Set to 90.)
XC: (Set to 90.)
DISPLAY
LEVEL 2
LEVEL 3
SLP XXX (Set to 30 min.)
PLM XXX (Set to 180 sec.)
Advertisement
Table of Contents
