Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
(4) Cabinet switches
1
Remove the right cabinet, the back cabinet, and the upper
cabinet.(Refer to the A-1/2/3.)
2
Remove the drum motor unit. (Refer to the G-3.)
3
Remove the drive belt A. (Refer to the G-3.)
4
Remove the drive frame unit. (Refer to the G-3.)
5
Remove the spring to release the switch holder.
Spring
Switch holder
6
Remove the front cabinet switch and the upper cabinet switch
from the switch holder.
(5) Paper feed motor
1
Remove the right cabinet, the back cabinet, and the upper
cabinet. (Refer to the A-1/2/3.)
2
Disconnect the motor connector from the PCU PWB.
3
Remove the paper feed motor.
Upper cabinet switch
Switch
holder
Front cabinet switch
Paper feed motor
Screw
(6) Drum motor
1
Remove the right cabinet, the rear cabinet, and the upper cabinet.
(Refer to the A-1/2/3)
2
Disconnect the motor connector from the PCU PWB.
3
Remove the drum motor unit. (Refer to the G-3. Drive belt.)
(Remove the photoconductor drum motor together with the drum
motor spacer.)
Screw
(7) Toner supply motor
(Color)
1
Remove the right cabinet, the back cabinet, and the upper
cabinet.(Refer to the A-1/2/3.)
2
Remove the drum motor unit. (Refer to the G-3.)
3
Remove the drive belt A. (Refer to the G-3.)
4
Remove the drive frame unit. (Refer to the G-3.)
5
Remove the toner supply motor from the drive frame.
Screw
12 – 24
Drum motor
frame
Drum motor
spacer
Screw
Photoconductor
drum motor
Toner supply motor
Drive frame
Advertisement
Table of Contents
