Show Platform Monitor - Cisco Catalyst 2960 Command Reference Manual

show platform monitor

show platform monitor
Use the show platform monitor privileged EXEC command to display platform-dependent Switched
Port Analyzer (SPAN) information.
Syntax Description session
session-number
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2960 Switch Command Reference
C-12
show platform monitor [session session-number] [ | {begin | exclude | include} expression]
(Optional) Display SPAN information for the specified SPAN session. The
range is 1 to 66.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C Catalyst 2960 Switch Show Platform Commands
78-16882-01