Traction Manifold Components - Genie ZX-135/70 Service And Repair Manual

Service and Repair Manual
Manifolds
8-10

Traction Manifold Components

The traction manifold is mounted inside the manifold box at the blue triangle side of the machine.
Index
Description
No.
1 Check valve, 5 psi / 0.3 bar
2 Solenoid Valve, 2 position 3 way
3 Solenoid Valve, 2 position 3 way
4 Check valve, 5 psi / 0.3 bar
5 Shuttle Valve, 3 position 3 way
6 Relief valve, 250 psi / 17.23 bar
7 Orifice Plug, 0.030 inch / 0.762 mm
8 Check valve, 5 psi / 0.3 bar
9 Check valve, 5 psi / 0.3 bar
10 Flow divider/combiner valve
11 Check valve, 5 psi / 0.3 bar
Flow control valve, 2 gpm / 7.6
12
L/min
114
Schematic
Item
K Anti-cavitation
P Two-speed drive motor shift
Q Brake release
R Brake circuit
Charge pressure circuit that directs hot oil
D
out of low pressure side of drive pumpp
E Charge pressure circuit
S Brake and two-speed circuit
N Drive motor anti-cavitation
M Drive motor anti-cavitation
Controls flow to square end drive motors in
C
forward and reverse
L Drive motor anti-cavitation
Equalizes pressure on both sides of
H
divider/combiner valve
ZX®-135/70
Function
Part No. 1279835GT
April 2018
Torque
30-35 ft-lbs /
40.7-47.5 Nm
26-30 ft-lbs /
35.3-40.7 Nm
26-30 ft-lbs /
35.3-40.7 Nm
20-25 ft-lbs /
27.1-33.9 Nm
50-55 ft-lbs /
67.8-74.6 Nm
20-25 ft-lbs /
27.1-33.9 Nm
20-25 ft-lbs /
27.1-33.9 Nm
20-25 ft-lbs /
27.1-33.9 Nm
30-35 ft-lbs /
40.7-47.5 Nm
90-100 ft-lbs /
122-135.6 Nm
20-25 ft-lbs /
27.1-33.9 Nm
30-35 ft-lbs /
40.7-47.5 Nm