Mitsubishi QD75P1N User Manual page 56

2 SYSTEM CONFIGURATION
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Q02PH/Q06PHCPU
Q12PH/Q25PHCPU
Q02U/Q03UD/
Q04UDH/
Q06UDHCPU
Q13UDH/Q26UDH/
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDE
H/Q26UDEHCPU
Q00U/Q00UJ/Q01U/
Q10UDH/Q20UDH/
Q10UDEH/
Q20UDEHCPU
Q50UDEH/
Q100UDEHCPU
For use on MELSECNET/H remote I/O
station
(3) Supported software packages
The following table lists the compatibility between the systems using the QD75 and
the software packages. GX Developer or GX Works2 is required for use of the
QD75.
(a) QD75P N/QD75D N
GX Developer
Single
programmable Version 7 or later
controller system
Multiple
programmable Version 8 or later
controller system
Single
programmable Version 4 or later
controller system
Multiple
programmable Version 6 or later
controller system
Single
programmable
controller system Version 8.68W or
Multiple
programmable
controller system
Single
programmable
controller system Version 7.10L or
Multiple
programmable
controller system
Single
programmable
controller system Version 8.48A or
Multiple
programmable
controller system
Single
programmable
controller system Version 8.68W or
Multiple
programmable
controller system
Single
programmable
controller system Version 8.76E or
Multiple
programmable
controller system
Single
programmable
controller system
Not available
Multiple
programmable
controller system
Version 6 or later
1: To use the QD75P N/QD75D N with GX Configurator-QP, select the
QD75P /QD75D
same manner as the QD75P /QD75D ; the setting ranges are the same. Therefore, a
speed exceeding 1000000pulse/s cannot be set in some items. (Refer to Appendix 1.2)
Software version
GX Configurator-QP
Version 2.10L or later
Version 2.00A or later
Version 2.29F or later
later
Version 2.13P or later
later
Version 2.25B or later
later
Version 2.29F or later
later
Version 2.32J or later
later
Not available
Version 2.00A or later
as the model name. The QD75P N/QD75D N can be used in the
2 - 8
MELSEC-Q
*1
GX Works2
Version 1.64S or later
Not available
Version 1.64S or later