Mitsubishi QD75P1N User Manual page 117

5 DATA USED FOR POSITIONING CONTROL
History of all warnings
Number of write accesses
to the flash ROM after the
power is switched ON
Monitor the current machine feed value
Monitor the current "current feed value"
Monitor the current target value
During independent axis control
During
Monitor the
interpola-
current speed
tion
control
Constantly indicates the speed of each axis
Monitor the current target speed
Monitoring details
Axis in which the warning occurred
Axis warning No.
Year:month
(QD75P N/QD75D N
Day:hour
Axis warning
(QD75P N/QD75D N
occurrence
Hour
(QD75P /QD75D )
Minute:second
Pointer No. next to the pointer No.
where the latest history is stored
Number of write accesses to flash ROM
[2] Monitoring the axis operation state
Monitoring the position
Monitor details
Monitoring the speed
Monitor details
When "0:
Composite speed"
Pr.20
is set for "
Interpolation speed
designation method"
When "1:
Reference axis speed"
Pr.20
is set for "
Interpolation speed
designation method"
Md.14
Md.15
.
Md 52
Md.16
Md.17
Md.18
Md.19
Md.21
Md.20
Md.32
Indicates the
speed of each
axis
Indicates the
composite
speed
Md.22
Indicates the
reference axis
speed
Md.28
Md.33
5 - 13
MELSEC-Q
Corresponding item
Axis in which the warning occurred
Axis warning No.
Axis warning occurrence (Year:month)
Axis warning occurrence (Day:hour)
Axis warning occurrence (Minute:second)
Warning history pointer
No. of write accesses to flash ROM
Corresponding item
Machine feed value
Current feed value
Target value
Corresponding item
Feedrate
Axis feedrate
Target speed