Yamaha RCX222 User Manual page 262

12. "SYSTEM" mode
12. Echo point No. / PNECHO
This is a special parameter and should always be set to "NO".
■ "Echo point No." setting
ＳＹＳＴＥＭ＞ＰＡＲＡＭ＞ＯＴＨＥＲＳ
１０．ＭＯＶＥＩ／ＤＲＩＶＥＩ ｓｔａｒｔ ｐｏｓ． Ｋｅｅｐ
１１．Ｓｅｒｖｏ ｏｎ ｗｈｅｎ ｐｏｗｅｒ ｏｎ ＹＥＳ
Chapter
１２．Ｅｃｈｏ ｐｏｉｎｔ Ｎｏ． ＮＯ
4
ＮＯ ＭＯＤＥ１ ＭＯＤＥ２
n
NOTE
• This parameter is added to controllers of Ver. 9.23 onwards.
• This parameter is set to "NO" at the time of shipment.
4-192
８．Ｕｎｉｔ ｓｅｌｅｃｔ Ｎｏｒｍａｌ
９．Ｅｒｒｏｒ ｏｕｔｐｕｔ（ＤＯ ＆ ＳＯ） Ｏｆｆ
Ｖ９．2 ３