Perform Engine Maintenance - Continental Models; Perform Engine Maintenance - Deutz Models - Genie S-80 Service Manual

February 2017
D-7
Perform Engine Maintenance –
Continental Model
Engine specifications require that this procedure be
performed every 1000 hours.
• Spark plugs- replace
• O2 sensors- replace
Required maintenance procedures and additional
engine information are available in the Continental
TME27 Owner's Manual.
Continental TME27 Owner's Manual
Genie part number
Part No. 1259369GT
Checklist D Procedures
D-8
Perform Engine Maintenance –
Deutz Models
Engine specifications require that this procedure be
performed every 1000 hours or annually,
whichever comes first.
• Fuel filter/water separator- replace
• V-belts- replace
• Charge air cooler- drain lube oil/condensate
• Cold starting device (if equipped)- check
• Hoses and clamps- inspect/replace
111901
• Engine mounts- inspect/tighten
Required maintenance procedures and additional
engine information are available in the Deutz 2011
Series Operation Manual OR the Deutz D 2.9 L4
Series Operation Manual.
Deutz 2011 Series Operation Manual
Genie part number
Deutz D 2.9 L4 Series Operation Manual
Genie part number
S-80 • S-85 • S-80X
Service Manual
139320
1251561
65