Drive Oil Diverter Manifold Components (Welder Option) - Genie S-80 Service Manual

Service Manual
Manifolds
8-10

Drive Oil Diverter Manifold Components (welder option)

The oil diverter manifold is mounted to the hydraulic generator located in the engine compartment.
Index
Description
No.
1 Directional Valve
2 Orifice disc, 0.031 inch / 0.8 mm
3 Solenoid valve
4 Relief valve
5 Pressure switch
6 Connector
7 Check valve
128
Schematic
Function
Item
CU Diverter valve
CV Delays shift to drive
CW Pilot valve to diverter
CX Charge pressure circuit
CZ Power to relay
--- For pressure switch
CY Prevents oil to generator
S-80 • S-85 • S-80X
February 2017
Torque
80-90 ft-lbs / 108-122 Nm
35-40 ft-lbs / 47-54 Nm
35-40 ft-lbs / 47-54 Nm
16 ft-lbs / 22 Nm
11 ft-lbs / 15 Nm
35-40 ft-lbs / 47-54 Nm
Part No. 1259369GT