Genie S-80 Service Manual page 172

Service Manual
Control System Fault Codes
Error Source
ID Name
54 Drive Brake Valve 21
55 High Drive Motor
Speed Valve
56 Platform Level
Value
57 Foot switch/ECU
Power
Crosscheck
61 Steer Joystick
62 Steer Directional
Valve
152
Error Type
ID Name
Fault
21 Fault
21 Fault
12 Value too high
15 Value too low
11 Value at 5V
12 Value too high
15 Value too low
16 Value at 0V
17 Not calibrated
21 Fault
S-80 • S-85 • S-80X
Condition
Drive frozen at zero and neutral.
Alarm sounds indicating a fault.
Motor speed in the low state.
Alarm sounds indicating a fault.
Direction frozen at zero and
neutral, AB
Direction frozen at zero and
neutral, AB
Limited speed and direction.
Frozen at zero and neutral. Alarm
sounds indicating a fault.
Limited speed and direction.
Frozen at zero and neutral. Alarm
sounds indicating a fault.
February 2017
Solution
Cycle power off, then on after
problem has been corrected.
Cycle power off, then on after
problem has been corrected.
Power up controller with
problem corrected
Power up controller with
problem corrected
Cycle power off, then on after
problem has been corrected.
Calibrate joystick.
Cycle power off, then on after
problem has been corrected.
Part No. 1259369GT