Genie S-80 Service Manual page 128

Service Manual
Engines
Deutz TD2011L04i models:
1 Tag and disconnect the wiring from the bell
housing.
2 Remove the U-bolt from the exhaust flex pipe
at the muffler.
Burn hazard. Beware of hot
engine components. Contact
with hot engine components
may result in severe burns.
3 Remove the muffler bracket retaining
fasteners from bell housing. Remove the
muffler and bracket assembly from the engine.
4 Support the drive pump with an appropriate
lifting device. Remove all of the remaining bell
housing engine fasteners.
5 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
6 Remove the flex plate mounting fasteners,
and remove the flex plate from the engine
flywheel.
Deutz TD 2.9 models:
1 Tag and disconnect the wiring from the bell
housing.
2 Support the drive pump with an appropriate
lifting device. Remove all of the bell housing
engine fasteners.
108
3 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
4 Remove the flex plate mounting fasteners,
and remove the flex plate from the engine
flywheel.
Perkins 804D models:
1 Tag and disconnect the wiring from the bell
housing.
2 Remove the exhaust pipe clamp at the muffler.
3 Remove the muffler mounting bracket
fasteners. Remove the muffler and bracket
assembly from the engine.
4 Remove the hose clamps from the air cleaner
elbow and the engine intake manifold.
5 Remove the air cleaner mounting bracket
fasteners. Remove the air cleaner and bracket
assembly from the engine.
6 Support the drive pump with an appropriate
lifting device. Remove all of the remaining bell
housing to engine fasteners.
7 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
8 Remove the flex plate mounting fasteners,
and remove the flex plate from the engine
flywheel.
S-80 • S-85 • S-80X
February 2017
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
Burn hazard. Beware of hot
engine components. Contact
with hot engine components
may result in severe burns.
Component damage hazard.
Hoses can be damaged if they
are kinked or pinched.
Part No. 1259369GT