Point Assignments - Bosch D7212GV3 Program Entry Manual

D7212GV3 | Program Entry Guide | 4.0
For SIA CP-01 Compliance:
P## Alarm Abort can be set to Yes or No.
This feature does not apply to Fire Alarms
or invisible point alarms.
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
Points
4.3

Point Assignments

These entries assign point indexes to Points 1 to 40
for the D7212GV3, and assign the points to the
areas. Also included in this section are parameters
used to set the point's debounce count, Relay (for
assigning relays to follow alarms for a group of
points), and custom keypad and report text for each
point.
Point Number
Default:
Selection:
Enter the point number you are programming. When
transmitting in Modem IIIa
number is reported to the central station receiver.
Point number 128 is reserved for
supervising Zonex 1.
P### Point Index
Default:
Selection:
This entry selects one of the 31 P## Index codes that
define the point's characteristics and determines how
the control panel responds to various point
conditions.
A setting of 0 disables the point.
1
to 40
2
, the three-digit point
Refer to the program record sheet
0to 31
EN | 91