Programming Example: Using Two Closing Windows To Cross The Midnight Boundary - Bosch D7212GV3 Program Entry Manual

D7212GV3 | Program Entry Guide | 5.0
Do not use a time of 23:59 as a window stop time
unless the window continues on the next day at
00:00. Fail to Close Reports are not sent, and the
Auto Close feature does not work for windows that
stop at 23:59.
Table 28: Programming Example: Using Two Closing Windows to Cross the Midnight Boundary
W#
Day of Week
1 S M T W T F S
2 S M T W T F S
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
Schedules (Skeds)
Open
Early Early
Begin Start Stop Begin
22 : 00
00 : 00
Do not program a single window to cross the
midnight boundary. The window stop time must be
later than the window start time. To program a
window that effectively crosses the midnight
boundary, you must program two windows.
For example, to program windows for an area that
closes between 11:30 PM and 12:30 AM, five days a
week, use two windows as shown in Table 28.
Close
eXcept
On
Holiday
Start Stop
23 : 30 23 : 59 Yes No
00 : 00 00 : 30 Yes No
EN | 99
Holiday
Index Area(s)
1 2 3 4 1 2 3 4 5 6 7 8
1 2 3 4 1 2 3 4 5 6 7 8