Table 12: Auto-Function Reports; Table 13: Rps Reports; Table 14: Point Reports - Bosch D7212GV3 Program Entry Manual

D7212GV3 | Program Entry Guide | 2.0
Auto Function Reports
The following prompts support customized routing of
Auto Function Reports. Selecting Yes enables a
report to be sent when the event occurs.

Table 12: Auto-Function Reports

Report Selection
s
R# Sked Yes, No
Executed
R# Sked Yes, No
Changed
Yes, No
R# Execute
Fail
RPS Reports
Selecting Yes enables sending a report when the
RPS Passcode Event occurs.
RPS Access Fail can indicate a wrong
RPS passcode when communicating
with the control panel or a valid RPS
session was terminated by a means
other than a Good-bye or Reset-bye
command. Remote Reset indicates a
Reset-bye command issued from RPS,
Fail to Call RPS indicates the control
panel called RPS but was unable to
connect.

Table 13: RPS Reports

Report Selections
R# Log Yes, No
Threshold
Yes, No
R# Log
Overflow
R# Para Yes, No
Changed
R# RPS OK Yes, No
R# RPS Fail Yes, No
R# Remote Yes, No
Reset
R# Program Yes, No
OK
R# Program Yes, No
Fail
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
Panel and Area Wide Parameters
Report Description
Sked Executed
Event
Sked Changed
Event
Fail to Execute
Event
Report Description
Event log threshold
reached
Log is full, old events
are overwritten
RPS Parameter
Change Event
Successful RPS
Access Event
Failed Access RPS
Event
Remote Reset Event
Successful Local
Programming Event
Failed Local
Programming Event
Point Reports
Selecting Yes enables a report to be sent when the
event occurs.

Table 14: Point Reports

Report Selections
R# Service Start Yes, No
R# Service End Yes, No
R# Fire Walk St Yes, No
R# Fire Walk End Yes, No
R# Walk Test St Yes, No
R# Walk Test End Yes, No
R# Extra Point Yes, No
R# Send Point Yes, No
1
Text
R# RF Low Bat Yes, No
R# RF Low Bat Yes, No
Res
1
Point text is always transmitted when using
network applications.
EN | 20
Report
Description
Reorts Service
Walk Test Start
Event
Service Walk
Test End Event
Fire Walk Start
Event
Fire Walk End
Event
Walk Test Start
Event for Walk
Test and
Invisible Walk
Test
Walk Test End
Event for Walk
Test and
Invisible Walk
Test
Extra Point
Event
Point Text
Low battery
conditions for
RF points
Low battery
restoral
conditions for
RF points