Figure 7: Command 43 Flow Chart (D1260) - Bosch D7212GV3 Program Entry Manual

D7212GV3 | Program Entry Guide | 6.0

Figure 7: COMMAND 43 Flow Chart (D1260)

Idle text
COMMAND 43
RPS VIA PHONE ?
NEXT
RPS VIA NETWORK?
ESC
ALLOW ANSWER ?
RPS IP Address #
Default: 0.0.0.0
Selection: 0.0.0.0 to 255.255.255.255
0 to 255 There are four numbers for an IP
address. Leading zeros are not
required.
This prompt contains the IP address for RPS.
An IP address has four fields. Each field has a range
of 0 to 255. For example, an IP address is expressed
as 110.227.64.190. Contact your network
administrator to determine the IP address to which
the RPS computer is connected.
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
NEXT
NEXT
ENT
ENT
(or ringing)
RPS CONNECTING
Idle text
AUXPARM
ENT
USE PORT ##### ?
NEXT
NEXT
ENTER PORT NUM ?
ESC
Refer to Keypad Programming of RPS IP Address #
and RPS PortNumber on page 116.
ENT
ENTER PORT #####
##### ENT
RPS CONNECTING
EN | 115
ENT