Disassembling And Assembling The Front Cover (Service Cover) - Dürkopp Adler D867 e-con Service Instructions Manual

3.4.3 Disassembling and assembling the front cover (service cover)

Fig. 8: Disassembling and assembling the front cover
(1) - Front cover
Disassembling the front cover
To disassemble the front cover:
1. Switch off the machine.
2. Loosen the screws (2).
3. Remove the front cover (1).
Assembling the front cover
To assemble the front cover:
1. Switching off the machine
2. Place the front cover (1).
3. Tighten the screws (2).
20
NOTICE
Property damage may occur!
Possible damage to the winder PCB.
If the winder PCB becomes damaged on account of a loose contact,
winding will no longer be possible.
Switch off the machine before assembling and disassembling
the front cover.
①
②
Make sure not to damage the thread lever.
②
(2) - Screws
Service Instructions D867 e-con - 00.0 - 08/2023
Working basis
②