Dürkopp Adler 550-867 Operating Instruction page 83

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
To adjust the security levels:
1. Log in with security level 2 ( p. 88).
2. Open the Setup display ( p. 139).
 The display switches to:
Fig. 67: Adjusting security levels (0-2)
3. Adjust the security levels (User level) as desired.
 The factory setting does not allow for the option to assign
every security level to every user.
For instance, it is not possible to allow a user with security
level 0 to access the Check display, which provides access
to all essential settings.
81