Dürkopp Adler 550-867 Operating Instruction page 225

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
Fig. 186: Creating an end label barcode (3)
4. If you do not wish to add a check digit to the barcode, access
the down-down menu of the Check Digit input field and select
the option NONE.
5. To add a check digit to the barcode, access the down-down
menu of the Check Digit input field and select the option of
your choice.
6. Enter the acronym of the information you wish to include in
the barcode into the Coded Information input field.
Information
Here, you can enter all information that is listed with an acronym
in the list on the right. You can add the desired acronyms by double-
clicking in the list on the right or by entering them into the Coded
Information input field using the keyboard.
If you, for instance, wish to add an * at the beginning and at the
end, enter the information into the input field as follows: K*...K*.
The K stands for "Konstante" - constant; the asterisks would be
repeated for every end label.
7. If you do not wish to encode the barcode, access the down-
down menu of the Barcode Encoding input field and select
the option NONE.
8. To encode the barcode, access the down-down menu of the
Barcode Encoding input field and select the Modulo36 option.
Information
If you wish to encode, but not shorten, the barcode, do not enter
any values into the Start Digit, End Digit and Count Digit input
fields.
223