Dürkopp Adler 550-867 Operating Instruction page 38

36
2. Feed the hook thread through the guides (3) to the winder (5).
3. Pull the beginning of the thread behind the thread-pulling
knife (7) and tear it off.
4. Push the bobbin lever (4) up against the empty bobbin.
 The bobbin lever (4) clicks audibly into place.
 An input field appears:
Fig. 21: Winding the hook thread (4)
5. Enter the bobbin number (6).
Information
Verify that the bobbin number (6) you entered is correct before
you tap the button.
6. Confirm with
 The thread is wound on.
 Winding is stopped automatically by the bobbin lever (4)
when the bobbin is full. The bobbin lever (4) will then click
audibly into place.
7. To interrupt the winding process prematurely, push the bobbin
lever (4) down and away from the bobbin.
.
Operating Instructions 550-867 - 00.0 - 11/2016
Operation