232
6.
Click on the Search button.
The display switches to:
Fig. 195: Performing a search (example) (3)
7.
If necessary, adjust the storage location on the left at which
the protocol database(s) is/are stored that you wish to scan.
8.
If necessary, select a specific protocol database of a single
day from the list on the right.
If you do not select a specific protocol database, the program
will scan all storage locations of the stored protocol databases.
9.
Confirm with OK.
The display switches to:
Fig. 196: Performing a search (example) (4)
Operating Instructions 550-867 - 00.0 - 11/2016
Programming