Dürkopp Adler 550-867 Operating Instruction page 148

146
Component
Scan end label
with hand scanner
Scan bobbin
barcode with hand
scanner
Primary barcodes
must be unique
Multi barcodes
must be unique
Confirm picture
in first seam
section
Thread cabinet
with door
detection
Function
The end label barcode can be scanned using
the end label scanner or the hand scanner.
This function makes it possible to use the
hand scanner instead of the end label
scanner.
The bobbin barcodes are scanned using the
fixed scanners located at the bobbin and
above the hook.  p. 64
This function makes it possible to use the
hand scanner instead of the fixed scanners.
The barcodes parts primary with changing
contents (e.g. with a consecutive number) are
checked to ensure that every barcode parts
primary is used only once. If a barcode parts
primary is scanned a second time, an error
message will be displayed.
All barcodes parts primary that can be used
are recorded in a text file
(PrimaryBarcodes.txt), which is stored in the
directory "System.DB".
The multi barcodes with changing contents
(e.g. with a consecutive number) are checked
to ensure that every multi barcode is used
only once. If a multi barcode with the same
content is scanned a second time, an error
message will be displayed. All multi barcodes
that can be used are recorded in a text file
(Multibarcodes.txt), which is stored in the
directory "System.DB".
This function involves the saving of an image
that must be compared to the sewing
material.
This type of equipment is a special enclosure
that is used for the thread reel stand. The
sewing process cannot start and no bobbin
can be wound unless the door is closed. If the
door is opened while the sewing process is
ongoing, the sewing process will stop.
Operating Instructions 550-867 - 00.0 - 11/2016
Programming