Dürkopp Adler 550-867 Operating Instruction page 114

112
Linking a teach-in file
A thread tension teach-in file is used to store all data necessary
to set the tolerance range for the electronically regulated thread
tension (for ETT only). These teach-in file is created ( p. 203)
and stored on the control panel and can be linked to each seam
record set.
To link a teach-in file to a seam record set:
1. Open the Seam record set display ( p. 102).
2. Tap the Thread.Tens.Teach-In input field.
 The directory holding the teach-in files that are stored on the
control panel opens.
3. Select the desired teach-in file.
4. Confirm with OK.
5. To bring up and view the settings, tap the Edit button.
Linking a label script file
Stored in a label script file is all relevant data about the end label.
Such a label script file can be created directly in the software
( p. 175) or using the Label Creator ( p. 212) and then saved
on the control panel before being linked to each seam record set.
To link a label script file to a seam record set:
1. Open the Seam record set display ( p. 102).
2. Tap the LabelScript input field.
 The directory holding the label script files that are stored on
the control panel opens.
3. Select the desired label script file.
4. Confirm with OK.
5. To bring up and view the settings, tap the Edit button.
Operating Instructions 550-867 - 00.0 - 11/2016
Programming