Dürkopp Adler 550-867 Operating Instruction page 150

148
Value Function
Hand scanner Select the hand scanner used
Thread Select the thread scanner used
scanner
Seam scanner Select the seam scanner used
UPS Type Select the type of the UPS
Length of card Length of the barcode used by the users to log in
barcode
Stitch count If an end label is sewn in later, the seam will be sewn
label sewing with the number of stitches set here.
Notch det. To prevent every thread crossing the light barrier to
stitches simulate a notch, the function Notch det. stitches
can be used to modify the response of the light barrier.
If, for instance, you enter the value 2, the size of the
notch must stretch across two stitches before it is
detected as a notch.
User level Changing the access rights makes it possible to modify
seam record the 3 security levels / the rights to access the system.
The entered values represent the corresponding
User level
security level the user must at least possess to execute
checks
the function  p. 79.
User level
abort sewing
User level
cont. sewing
Barcodes
The Barcodes display holds the basic settings for the barcodes
( p. 170).
Label
The Label display contains the basic settings for the end label
(Label) ( p. 180).
Operating Instructions 550-867 - 00.0 - 11/2016
Programming