Dürkopp Adler 550-867 Operating Instruction page 110

108
Information
If the seam section is linked to a teach-in file, the data stored in
the teach-in file will overwrite the manually entered data.
Setting the stroke
To set the desired stroke:
1. Open the Seam record set display ( p. 102).
2. Tap the Stroke input field.
 An input field appears.
3. Enter the desired stroke.
4. Confirm with
Setting the switchable stroke
To set the stroke that can be switched on/off using the knee button:
1. Open the Seam record set display ( p. 102).
2. Tap the Stroke knee input field.
 An input field appears.
3. Enter the desired stroke.
4. Confirm with
Information
The maximum stroke is 9 mm/level 7.
The switchable stroke can be used in push-to-run/hold-to-run
mode ( p. 59).
.
.
Operating Instructions 550-867 - 00.0 - 11/2016
Programming