204
Information
The display Teach-In for Thread Tension is divided into
several sections (Step 1-5). The section currently being edited
is highlighted in yellow. The sections that have already been
completed are highlighted in green.
To create a teach-in file:
1.
Log in with security level 2 ( p. 88).
2.
Open the Checks display ( p. 132).
3.
Tap the Thread tens. button.
4.
Tap the Teach-In button.
The display switches to:
Fig. 163: Creating a teach-in file (1)
5.
Enter the desired target value of the documented seam section.
Use the manufacturer's specifications as a reference.
The upper and lower limit will be entered automatically as
soon as the target value has been defined.
Operating Instructions 550-867 - 00.0 - 11/2016
Programming