Dürkopp Adler 550-867 Operating Instruction page 113

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
To set the needle thread and hook thread IDs:
1. Open the Seam record set display ( p. 102).
2. Tap the Released thread/needle thread ID input field.
 The display switches to Released needle thread
(ident. no.).
3. Enter the ID.
4. Confirm with
 The input field Released bobbin thread (ident. no.)
appears.
5. Enter the ID.
6. Confirm with
Important
The thread ID is a very important piece of information for the seam
record set; it is essential that it be stored in the seam record set.
This is the only way to ensure that needle and hook threads
matching the seam record set are used at the beginning of a
sewing process.
Defining the text on the end label
Here, you can define the text that will be printed on the end label.
To enter the text:
1. Open the Seam record set display ( p. 102).
2. Tap the Text for printed label input field.
 An input field opens.
3. Enter the desired text.
4. Confirm with
Information
This function is only available in a documented seam section.
Another option is to link a label script file to the seam record set
that contains all information about the end label ( p. 212).
.
.
.
111