Dürkopp Adler 550-867 Operating Instruction page 217

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
You can use this program interface to
• create a new end label
• open and edit/copy the label script file of an existing end
label
5. Check and, if necessary, adjust the preset size of the new end
label ( p. 217).
6. Open the Toolbox and place it next to the end label
( p. 218).
Fig. 176: Preparing the end label (example) (2)
7. Create and insert the end label barcode ( p. 222).
8. If necessary, create and insert another barcode ( p. 225).
Important
If adding an additional barcode, you must not define this barcode
as an end label barcode as well. Otherwise, the system will display
an error message when you try to save the second end label
barcode.
An error message will also appear if NO barcode on the end label
was defined as the end label barcode.
9. Create and insert standard text ( p. 225).
10. Create and insert variable text ( p. 226).
11. Insert a graphic; e.g. the company logo ( p. 227).
12. Save the new label script file ( p. 228).
215