Operation
Operating Instructions 550-867 - 00.0 - 11/2016
Fig. 53: Sewing (1)
3.
Scan the barcodes parts primary of the sewing material.
The system checks if the sewing material (2 or 3 pieces)
matches the selected seam record set. If this is not the
case, an error message will appear.
Information
If, under Setup, the function Multiple barcodes or Multi barcode
with batch mode is activated ( p. 179), the display switches
to the following after the scanning of the primary piece barcode:
Fig. 54: Sewing (2)
67