Dürkopp Adler 550-867 Operating Instruction page 119

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
To add additional seam sections:
1. Open the Seam record set display ( p. 102).
2. Select the seam section after which you wish to add the new
seam section.
3. Tap the Insert button.
 The display switches to a confirmation.
4. Confirm with OK.
 A new free seam section is added as an additional bar on
the right next to the selected seam section.
Deleting a seam section
It is possible delete any seam section.
To delete the selected seam section:
1. Open the Seam record set display ( p. 102).
2. Select the seam section you wish to delete.
3. Tap the Delete button.
 The display switches to a confirmation prompt.
4. Confirm with OK.
117