Dürkopp Adler 550-867 Operating Instruction page 175

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
Barcode Stored information
Mask count of This option is used to define how many multi barcodes
multiple are supposed to be scanned. The desired number is
barcode specified by selecting the corresponding digit of the
barcode parts primary.
If you, for instance, wish to scan 5 multi barcodes, the
digit to be read in the barcode must be the number 5:
000010000000000000000000000000
Additional barcodes:
Mask batch Batch mode must be activated if you a wish to store a
corresponding piece of information here.  p. 178
size
Unused without function
Mask multi This option can be used to print out information stored
barcode label in the multi barcodes placed on the end label.
Needle thread This option is used to specify how many needle thread
code barcodes will be read at which places
Hook thread This option is used to specify how many hook thread
code barcodes will be read at which places
Code A If you wish to exclusively process pieces with a specific
Setpoint ID number, enter that ID number here. If you wish to
sew pieces with different ID numbers, you must not
enter anything here.
ID.- part 1 Here, you define a designation for the 1
piece to be sewn. This designation may consist of
ID.- part 2
numbers and/or letters. The designation must be found
as specified at the defined place in the barcode parts
ID.- part 3
primary of the 1
All 3 IDs must be different.
ID.- left side Here, you specify whether the 1
sewn is located on the left or the right. The entered
ID.- right side
value must be found as specified at the defined place
in the barcode parts primary of the 1
sewn.
Id. other Here, you can store an additional piece of information
regarding the 3
must be found as specified at the defined place in the
barcode parts primary of the 3
st nd rd
, 2 and 3 piece to be sewn.
st
/ 2
rd
piece to be sewn. The entered value
rd
piece to be sewn.
st nd rd
, 2 and 3
nd
piece to be
st nd
/ 2 piece to be
173