Dürkopp Adler 550-867 Operating Instruction page 146

144
Component
Scanner bobbin
thread
Winder
Step motor
Read bobbin
number with
fixed scanner
Scanner on
the seam
Needle thread
sensor reel
(Sensor needle
thread cone)
Bobbin thread
sensor reel
(Sensor bobbin
thread cone)
Multi barcodes
With UPS control
Needle control
Multi barcode
with batch mode
Function
Reading the hook thread barcode using the
fixed scanner (optional  p. 63)
Motorized winder
Stitch length adjustment controlled by step
motor
Bobbin identification by barcode
(optional,  p. 64)
Monitoring of the end label
(optional,  p. 62)
Monitoring of the needle thread reel by
proximity switch. The sensor detects when
the needle thread reel has been removed.
The needle thread barcode is scanned using
the hand scanner.
Monitoring of the hook thread reel by
proximity switch. The sensor detects when
the hook thread reel has been removed.
The hook thread barcode is scanned using
the hand scanner.
Apart from the barcodes parts primary,
it is also possible to request up to 9 multi
barcodes at the beginning of the sewing
process
Automatic switch to battery power when the
power supply has been interrupted  p. 166
Set when the needle is supposed to be
checked and/or changed. The needle
database cannot be viewed unless this
function is enabled  p. 153
Batch mode makes it possible to scan
the barcodes parts primary and the multi
barcodes and, subsequently, sew repeatedly
without the need to scan the barcodes again
 p. 178
The batch size is used to define how many
sewing processes are supposed to be
completed before the barcodes will be
requested again.
Operating Instructions 550-867 - 00.0 - 11/2016
Programming