Dürkopp Adler 550-867 Operating Instruction page 27

Operation
Operating Instructions 550-867 - 00.0 - 11/2016
Information
Do NOT slide the hook cover (2) past the proximity switch (4).
Otherwise, the barcode / bobbin number will be requested a
second time as soon the hook cover (2) is no longer positioned
above the proximity switch (4).
6. Do not slide the hook cover (2) any further than up to the
proximity switch (4).
 The barcode on the bobbin / the bobbin number is visible.
Fig. 8: Scanning barcodes (4)
⑤
(5) - Bobbin
 Once the bobbin (5) is positioned properly inside the hook,
the barcode will be captured automatically.
7. If the bobbin (5) is not quite seated correctly so that the
barcode cannot be read, carefully pull on the hook thread and
turn the bobbin to the correct position.
 Once the barcode has been scanned successfully, the
corresponding prompt on the control panel will disappear.
8. Push the hook cover (2) to the left as far as it will go.
9. Fold the edge stop (1) back down
 The machine is ready for operation. You can now put the
machine into operation for the first time ( p. 26) or log in
right away ( p. 87).
25