38
Fig. 23: Inserting/changing the bobbin (2)
(4) - Hook cover
(5) - Locking mechanism
To insert or change the bobbin housed in the hook:
1.
Fold up the edge stop (7).
2.
Push the locking mechanism (5) down and keep it pressed.
3.
Slide the hook cover (4) to the right.
The hook cover (4) must be pushed past the proximity
switch (6) as it will otherwise not be possible to remove the
bobbin from the hook and to re-insert it.
The hook cover (4) is now unlocked; the bobbin can be
inserted.
Fig. 24: Inserting/changing the bobbin (3)
⑧
(8) - Bobbin case retainer
④
(6) - Proximity switch
(7) - Edge stop
Operating Instructions 550-867 - 00.0 - 11/2016
Operation
⑦
⑤ ⑥