Dürkopp Adler 550-867 Operating Instruction page 115

Programming
Operating Instructions 550-867 - 00.0 - 11/2016
Information
If a label script file is linked to a seam record set, all other settings
regarding the end label will be overwritten by the information stored
in the file.
Linking a picture file
Each seam record set can be linked to an image (picture file).
If the machine is used to process different sewing materials,
e.g. driver and passenger seat covers, the corresponding seam
program can be linked to an image of the driver / passenger seat
cover.
The image of the seam record set will be displayed at the start of
a sewing process.
To link an image to a seam record set:
1. Open the Seam record set display ( p. 102).
2. Tap the PictureFile input field.
 The directory holding the images that are stored on the
control panel opens.
3. Select the desired image.
4. Confirm with OK.
Setting start and end bartack
Here, the start and end bartack are defined in detail.
There are three options each:
• no start/end bartack
• single start/end bartack
• double start/end bartack
113