Start A Session With Route Guidance; Start A Session With Race Pace; Start A Session With Interval Timer - Polar Electro V800 Owner's Manual

START A SESSION WITH ROUTE GUIDANCE

1. Begin by going to Favorites.
2. Choose the route from the list and press START.
3. Press START to enter the pre-training mode, and choose the sport profile you want to use.
4. When V800 has found all the signals, press START.
training.
For more information on route guidance, "Route Guidance " on page 58

START A SESSION WITH RACE PACE

1. Begin by going to Favorites.
2. Choose Race pace, and press START. Set the target distance km/m and target time.
3. Press START to enter the pre-training mode, and choose the sport profile you want to use.
4. When V800 has found all the signals, press START.
training.
For more information on Race Pace, "Race Pace" on page 58

START A SESSION WITH INTERVAL TIMER

You can set one repeating or two alternating time and/or distance based timers for guiding your work and
recovery phases in interval training.
1. Begin by going to
2. Choose Time-based
Time-based: Define minutes and seconds for the timer and press START.
l
Distance-based: Set the distance for the timer and press START.
l
3. Set another timer?
4. When completed, choose
and then choose the sport profile you want to use.
5. When V800 has found all the signals, press START.
training.
Timers > Interval timer. Choose
or Distance-based:
is shown. To set another timer, choose Yes.
Start X.XX km / XX:XX
Recording started
Recording started
Set timer(s) to create new timers.
and press START to enter the pre-training mode,
Recording started
47
is displayed and you can start
is displayed and you can start
is displayed and you can start