Table of Contents
Advertisement
SENSORS
Pair a Stride Sensor with V800
POLAR STRIDE SENSOR BLUETOOTH® SMART
PAIR A STRIDE SENSOR WITH V800
Make sure the stride sensor has been correctly attached to your shoe. For more information on setting up the
stride sensor refer to the user manual of the stride sensor.
There are two ways to pair a stride sensor with your V800:
1. Press START in time view to enter pre-training mode.
2. Touch your stride sensor with V800, and wait for it to be found.
3. The device ID
Pair Polar RUN xxxxxxxx
4.
Pairing completed
or
1. Go to
General Settings > Pair and sync > Pair other device
2. V800 starts searching for your stride sensor.
3. Once the stride sensor is found,
4. Press START,
5.
Pairing completed
CALIBRATE THE STRIDE SENSOR
Calibration of the stride sensor improves the accuracy of speed/pace and distance measurements. It is
recommended that you calibrate the stride sensor before using it for the first time, if there are significant
changes in your running style, or if the position of the stride sensor on the shoe is dramatically changed (e.g. if
you have new shoes or if you switch the sensor from your right shoe to your left one). The calibration should
is shown when you are done.
Polar RUN xxxxxxxx
Pairing
is displayed.
is displayed when you are done.
is displayed. Choose Yes.
and press START.
is displayed.
89
89
89
89
90
90
91
92
92
92
93
93
94
94
95
95
Advertisement
Chapters
Table of Contents
