Polar Look Kéo Power Sensor Bluetooth® Smart; Pair Kéo Power With V800 - Polar Electro V800 Owner's Manual

4. Pairing completed
5. Sensor linked to:
or
1. Go to General Settings > Pair and sync > Pair other device
2. V800 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The
flashing red light in the sensor indicates that the sensor is activated.
3. Once the cadence sensor is found,
4. Press START,
5. Pairing completed
6. Sensor linked to:
POLAR LOOK KÉO POWER SENSOR BLUETOOTH® SMART
PAIR KÉO POWER WITH V800
Before pairing Kéo Power make sure you have installed the it correctly. For information on mounting the
pedals and installing the transmitters see the Polar LOOK Kéo Power user manual that came in the product
box or the video tutorial.
Both transmitters need to be paired one at a time, therefore you have to perform the pairing twice when taking
Kéo Power into use. After pairing the first transmitter, you can immediately pair the second one by selecting it
from the list. Check the device ID can found on the backside of each transmitter to make sure both
transmitters have been paired.
There are two ways to pair Keó Power with your V800:
1. Press START in time view to enter pre-training mode.
2. Rotate the cranks to wake up the transmitters.
3. The device ID Pair Polar PWR xxxxxxxx
4. Pairing completed
or
1. Go to General Settings > Pair and sync > Pair other device
2. Rotate the cranks to wake up the transmitters. V800 starts searching for Kéo Power.
3. Once the it is found,
4. Press START,
5. Pairing completed
is displayed when the pairing is complete.
is displayed. Choose
Polar CAD xxxxxxxx
Pairing is displayed.
is displayed when the pairing is complete.
is displayed. Choose
is shown when you are done.
Polar PWR xxxxxxxx
Pairing is displayed.
is displayed when you are done.
Bike 1 or Bike 2. Confirm with START.
is displayed.
Bike 1 or Bike 2. Confirm with START.
is displayed. Choose Yes.
is displayed.
94
and press START.
and press START.