Polar Cadence Sensor Bluetooth® Smart; Pair A Cadence Sensor With V800 - Polar Electro V800 Owner's Manual

ETRTO
35-559
37-622
52-559
20-622
52-559
23-622
25-622
28-622
32-622
42-622
47-622
Wheel sizes on the chart are advisory as wheel size depends on the wheel type and air pressure.
Method 2
Measure the wheel manually for the most accurate result.
l
Use the valve to mark the point where the wheel touches the ground. Draw a line on the ground to mark
l
that point. Move your bike forward on a flat surface for one complete rotation. The tire should be per-
pendicular to the ground. Draw another line on the ground at the valve to mark a full rotation. Measure
the distance between the two lines.
Subtract 4 mm to account for your weight on the bike to get your wheel circumference.
l
POLAR CADENCE SENSOR BLUETOOTH® SMART

PAIR A CADENCE SENSOR WITH V800

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence
sensor refer to the user manual of the cadence sensor.
There are two ways to pair a cadence sensor with your V800:
1. Press START in time view to enter pre-training mode.
2. V800 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor.
The flashing red light in the sensor indicates that the sensor is activated.
3. The device ID Pair Polar CAD xxxxxxxx
Wheel size diameter (inches)
26 x 1.50
700 x 35C
26 x 1.95
700 x 20C
26 x 2.0
700 x 23C
700 x 25C
700 x 28
700 x 32C
700 x 40C
700 x 47C
is displayed. Choose Yes.
93
Wheel size setting (mm)
1947
1958
2022
2051
2054
2070
2080
2101
2126
2189
2220