Firmware Update; How To Update Firmware - Polar Electro V800 Owner's Manual

Set backlight: Set
l
Sport specific tap
l
Set how hard you have to tap the display when using tap gestures in the sport profile you are currently
using.
Search sensor: Search for a heart rate sensor, running or cycling sensor.
l
Stride sensor: Choose
l
matic or Manual. In
Calibrate altitude
l
when you know your current altitude.
Countdown timer: Set the countdown timer on. The countdown timer is shown in its own training view
l
when set on.
Interval timer: Create time and/or distance based interval timers to precisely time work and recovery
l
phases in your interval training sessions.
Current location
l
By selecting Set location guide
l
Location guide is used by the Back to start feature, that guides to your starting point or a POI.
You can change the target point by returning to the
When Location guide
Press START when
l

FIRMWARE UPDATE

The firmware of your V800 can be updated. Any time a new firmware version is available, FlowSync will notify
you when connecting V800 to your computer with the USB cable. The firmware updates are downloaded via
the USB cable and FlowSync software. Flow app will also notify you when new firmware is available.
Firmware updates are performed to improve the functionality of your V800. To make sure your V800 always
works at its best, we recommend that you update the firmware every time a new version available. Updates
can include improvements to existing features, completely new features or bug fixes, for example.

HOW TO UPDATE FIRMWARE

To update the firmware of your V800, you must have:
A Flow web service account
l
Installed FlowSync software
l
Registered your V800 in the Flow web service
l
On or Off.
sensitivity: Choose Off,
Calibration or
Choose sensor for
: Set the correct altitude. It is recommended to always manually calibrate altitude
info: This selection is only available if GPS is set on for the sport profile.
on, Set target point
is set on, Save new POI
Save new POI is displayed to save your current location as a point of interest.
Light tap, Normal
Choose sensor for speed. In Calibration, choose
speed, set the source for speed data:
is displayed. Choose
Quick menu, and choosing
is added to the Quick
36
tap, Strong tap or Very strong
Stride sensor
Starting point (default)
Change target
menu.
tap.
Auto-
or GPS.
.
point.