Settings - Polar Electro V800 Owner's Manual

Running
l
Cycling
l
Swimming
l
Other outdoor
l
Other indoor
l
Triathlon
l
Free multisport
l
If you have edited your sport profiles in the Flow web service before your first training session,and synced
them to your V800, the sport profile list will contain the edited sport profiles.

SETTINGS

To view or modify sport profile settings, go to
edit. You can also access sport profile settings from pre-training mode by pressing and holding LIGHT. In
sport profiles, that include multiple sports (e.g. triathlon and biathlon) the settings for each sport can be
modified. For example, in triathlon you can modify the settings for swimming, cycling and running.
Training sounds: Choose Off, Soft,
l
Vibration feedback: Choose
l
stop a training session, GPS signal is found or you reach a training target.
Heart rate settings:
l
reserve. Check HR zone
device: Choose
detect your heart rate.
Bike power settings: Choose
l
power zone limits. Set how you want to view your power, how frequently data points of your power
are recorded, set your FTP value or view your power zone limits.
Bike power settings are visible only if Kéo Power has been paired.
GPS recording: Choose Off,
l
Sport specific tap
l
Set how hard you have to tap the display when using tap gestures.
Stride sensor: Choose
l
matic or Manual. In
For more information on Stride sensor calibration, "Polar Stride Sensor Bluetooth® Smart" on page 89
Stride sensor is visible only if a stride sensor has been paired.
Settings > Sport profiles
Loud
On or Off. When set on, V800 vibrates, for example, when you start or
Heart rate view: Choose
limits: Check the limits for each heart rate zone.
On or Off. If you choose On, other compatible devices (e.g. gym equipment) can
Power view,
Normal or
sensitivity: Choose Off,
Calibration or
Choose sensor for
or Very loud.
Beats per minute
Power, rolling average,
Power save, long session.
Light tap, Normal
Choose sensor for speed. In Calibration, choose
speed, set the source for speed data:
29
and choose the profile you want to
(bpm), % of maximum
HR visible to other
Set FTP value or
tap, Strong tap or Very strong
Stride sensor
or % of Hr
Check
tap.
Auto-
or GPS.