Power Settings On V800; Calibrate Kéo Power - Polar Electro V800 Owner's Manual

POWER SETTINGS ON V800

Adjust the power settings to best suit your training needs. Edit the power settings in
profiles, and choose the profile you want to edit, and choose
In the Bike power settings
Power view: Choose
l
Power, rolling
l
5,10, 15, 30 or 60 seconds.
Set FTP value: Set your FTP value. The setting range is 60 to 600 watts.
l
Check power zone
l
CALIBRATE KÉO POWER
Calibrate Kéo Power before starting your session. V800 calibrates itself automatically each time the
transmitters wake up and V800 is found. The calibration takes a couple of seconds.
Training temperature has an effect on the calibration accuracy, so make sure your bike's temperature has
become stable before you start the offset calibration.
To calibrate Kéo power:
1. Wake up the transmitters by rotating the cranks and choose pre-training mode on your V800 to start the
calibration.
2. Keep the bike upright and cranks in place until calibration is completed.
To ensure the calibration is done properly:
Do not put any weight on the pedals during calibration.
l
Do not interrupt the calibration.
l
When the calibration is complete a green LED will blink on the transmitters, and you can start your session.
you'll find:
Watts (W), Watts/kg (W/kg)
average: Set how frequently data points of your power are recorded. Choose 1, 3,
limits: Check your power zone limits.
Bike power settings.
or % of FTP.
95
Settings > Sport