Polar Electro V800 Owner's Manual page 45

2. Choose the sport profile you want to use.
To change the sport profile settings before starting your session (in pre-training mode),
press and hold LIGHT to enter the
press BACK.
Wait for GPS and optional sensors to be found
3. If you have activated the GPS function and/or paired an optional sensor*,V800 will
automatically start searching for the signals.
heart rate. OK is shown next to the sensor icon when it is found.
4. Stand still and hold the position until V800 has found the satellite signals. The
percentage value shown next to the GPS icon indicates when the GPS is ready.
When it reaches 100 %, Ok is displayed, and you are ready to go.
V800 uses SiRFInstantFix™ satellite prediction technology to acquire a fast satellite
fix. It accurately predicts satellite positions for up to three days allowing you to find
satellite signals in 5 -10 seconds.
To catch the GPS satellite signals, go outdoors and away from tall buildings and
trees. Wear V800 with the face upwards on your wrist. Keep it in a horizontal position
in front of you and away from your chest. Keep your arm stationary and raised above
the level of your chest during the search
Due to the location of the GPS antenna on the V800, it is not recommended to wear it
with the display on the underside of your wrist. When wearing it on the handlebars of a
bike, make sure the display is facing up.
5. When V800 has found all the signals, press START.
displayed and you can start training.
During training recording you can change the training view with UP/DOWN. To
change settings without stopping the training recording, press and hold LIGHT to enter
Quick
Stay in the pre-training mode until V800 has found the sensor signals and your
For best GPS performance, wear V800 on your wrist with the display facing up.
menu. For more information, "Quick Menu" on page 35
Quick Menu. To return to the pre-training mode,
45
Recording started is