Connecting A Bluetooth ® Phone - Lexus 2013 IS250 Owner's Manual

338
5-7. Connecting Bluetooth
Connecting a Bluetooth
There are two connecting methods available: automatic and manual.
Auto connection
When you register a phone, auto connection will be activated. Always set
it to this mode and leave the Bluetooth
tion can be established.
When the engine switch is turned to ACCESSORY or IGNITION ON
mode, the system will search for a nearby cellular phone you have regis-
tered.
Next, the system automatically connects with the most recent phone that
was connected. The connected result is displayed.
Manual connection
When auto connection has failed or "Bluetooth
you must connect the Bluetooth
1
Go to "Bluetooth
2
Select the device to connect.
3
Select "Connect all", "Connect as a telephone" or "Connect as audio
player".
If the desired Bluetooth
(P. 335)
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Reconnecting a Bluetooth
If the system cannot connect due to poor signal strength with the engine switch in
ACCESSORY or IGNITION ON mode, the system will automatically attempt to
reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this case,
the connection must be made manually, or the phone must be reselected.

Connecting a phone while Bluetooth

Bluetooth

It may take time to connect.
IS250_EE(OM53B11E)
®
®
®
*
setup":
®
device is not displayed, register the device.
®
phone
®
audio will stop temporarily.
phone
®
phone in a place where a connec-
*
power" is turned off,
device manually.
 "Setup"  "Bluetooth
®
audio is playing
*
"