Table of Contents
Advertisement
Back-up light
1
Open the trunk, remove the 3
clips on the side which the
bulb is to be replaced and pull
back the trunk lid cover.
2
Turn the bulb base counter-
clockwise.
3
Remove the light bulb.
Pull out the connector carefully,
ensuring that excessive pulling
load is not applied to the wire har-
ness.
4
Install a new light bulb then
install the bulb base to the
light unit by inserting it and
turning the bulb base clock-
wise.
After installing the light bulb,
turn on the back-up light to visu-
ally check that there is no light
leaking from the bulb base.
5
Reinstall the trunk lid cover with the 3 clips.
To install the clips, simply push them in.
IS250_EE(OM53B11E)
7-3. Do-it-yourself maintenance
457
7
Advertisement
Table of Contents
